Wood Technology & Processes

Self-Check :

Safety Quiz 17

Using a Lathe



1.

Before turning wood on a lathe, make sure it is
A)hardwood.
B)free of defects.
C)free of sawdust.
D)softwood.
2.

Before being turned on a lathe, glued-up work must cure for
A)at least 2 hours.
B)at least 6 hours.
C)at least 12 hours.
D)at least 24 hours.
3.

Position the as close as possible to the workpiece without touching it.
4.

Which statement is an overall guideline for setting speed on the lathe?
A)Start fast; slow down as the stock gets shaped.
B)Try the fastest speed possible; continue as fast as possible.
C)Set a lower speed than that recommended for the stock size.
D)Start slow and then speed up; don’t exceed the recommended speed.
5.

What adjustment should you make before sanding or polishing?
A)Move the tool rest closer to the stock.
B)Remove the tool rest.
C)Add lighting to the work area.
D)Add a second tool rest.
Glencoe Online Learning CenterTrade & Industrial Education HomeProduct InfoSite MapContact Us

The McGraw-Hill CompaniesGlencoe

Please read our Terms of Use and Privacy Notice before you explore our Web site. To report a technical problem with this Web site, please contact the Web Producer.